Cat Exercise Wheels

Replace or change out the tiles for your Fit 'n' Fun Ferris Cat Wheel! Our tiles offer safe and comfortable traction so that your cat can move on the wheel with comfort and ease. Made with high quality EVA foam, these tiles are shock absorbent, water resistant, and easy to clean. 4 methods for removing old foam tiles & residue: Hair dryer: Wearing protective gloves, use the hot setting of a hair dryer to heat up a small section of tile at a time, then scrape off with a spatula or scraper.  Adhesive & glue remover: After scraping off old tiles, apply adhesive and glue remover directly or via cloth to help remove tile remnants. Follow with a spatula, scraper, or scratch-free tough sponge to remove residual adhesive. Ensure all of the glue remover is washed off the wheel panels and that the wheel is completely dry prior to sticking on fresh EVA foam tiles. Soapy boiled water: Wearing protective gloves, submerge the wheel in a bathtub filled with boiled, soapy water. The tiles should slide off as the glue will have softened up. Rotate the wheel to a new section and repeat. If the wheel is too large for your bathtub, disassemble the white panels into quarters or thirds. If you do not have a bathtub, disassemble each panel and soak in a laundry or kitchen sink. Ensure the panels are completely dry and free from residue prior to reassembly and tile placement. Pressure washer: Place the wheel outside on a flat, level surface. Cover wheelbase with plastic, place the wheel back on, and follow the instructions of your chosen pressure washer. Note: this option will make a mess, so be prepared for bits of foam debris to fly everywhere!